Product Information:
Material: PC

Steps:
Step: First thread the cotton thread through the hole
Step two: Tie the cotton thread into a slipknot and pull it tight to prevent wax leakage.
Step 3: Weigh the required amount of wax (use paraffin wax or soy wax beeswax 1:1)
Step 4: Heat and melt the wax material (wax liquid is heated to about 100 degrees)
Step 5: Add candle paint, stir well and pour into the mold.
Step 6: Fix the cotton thread with a positioning frame, and release the mold after cooling (the cooling time of different mold sizes varies from 3-5 hours due to the temperature)
Step 7: After the wax has cooled completely, untie the slipknot at the bottom and tap the mold to release the mold. The proportion of wax material and the temperature of wax pouring should be correct. The wrong proportion and temperature will lead to difficult demoulding and poor finished product effect. (The above steps apply to all column candles)

Packing list:
Mould x1pc